manualshive.com logo in svg

Honda CRF1000 Africa Twin, Manual

Share
Download
Honda CRF1000 Africa Twin Manual Download Page 322

2.

Make sure that the slot on the brake

caliper bracket is positioned in the lug on

the swingarm.

3.

Adjust the drive chain. 

2

P. 274

4.

Install and tighten the rear axle nut.

Torque:

 100 N·m (10.2 kgf·m, 74 lbf·ft).

5.

Install the chain cover and tighten bolts.

6.

After installing the wheel, apply the brake

pedal several times, then check if the

wheel rotates freely. Recheck the wheel if

the brake drags or if the wheel does not

rotate freely.

If a torque wrench was not used for

installation, see your dealer as soon as

possible to verify proper assembly.
Improper assembly may lead to loss of

braking capacity.

20190704203539_32MKS6000_eng_BOOK Page 322 Thursday, July 04 2019 20:57:26 JST

Tyre Puncture 

u

 

Removing Wheels

Troubleshooting

317

Lug

Swingarm

Brake caliper bracket

Slot

Summary of Contents for CRF1000 Africa Twin
























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands