Honda CRF1000 Africa Twin Manual Download

Page: 229 / 375

Refuelling

Do not fill with fuel above the level plate.

Fuel type:

Unleaded petrol only

Fuel octane number:

Your vehicle is

designed to use Research Octane Number

(RON) 91 or higher.

Tank capacity:

CRF1100A/D

18.8 L (4.97 US gal, 4.14 Imp gal)

CRF1100A2/A4/D2/D4

24.8 L (6.55 US gal, 5.46 Imp gal)

Refuelling and Fuel Guidelines

(

P.15

)

Opening the Fuel Fill Cap

Open the lock cover, insert the ignition key,

and turn it clockwise to open the fuel fill cap.

Closing the Fuel Fill Cap

After refuelling, push the fuel fill cap closed

until it locks.

Remove the key and close the lock cover.

The key cannot be removed if the fuel fill

cap is not locked.

WARNING

Petrol is highly flammable and

explosive. You can be burned or

seriously injured when handling fuel.

•

Stop the engine, and keep heat,

sparks, and flame away.

•

Handle fuel only outdoors.

•

Wipe up spills immediately.

20190704203539_32MKS6000_eng_BOOK Page 229 Thursday, July 04 2019 20:57:26 JST

Operation Guide

224

Ignition key

Lock cover

Fuel fill cap

Level plate

Summary of Contents for CRF1000 Africa Twin
























































































































































































































































































































































































Search results

Summary of Contents for CRF1000 Africa Twin

Reviews:

Related manuals for CRF1000 Africa Twin

Brands by name

Popular brands

Honda CRF1000 Africa Twin, Manual

Search results

Summary of Contents for CRF1000 Africa Twin

Reviews:

Related manuals for CRF1000 Africa Twin

Brands by name

Popular brands