Honda CR-V 2004, Owner'S Manual

Page: 24 / 256

Your seat belt system includes lap/
shoulder belts in all five seating
positions. The front seat belts are
also equipped with automatic seat
belt tensioners.
The seat belt system
includes a light on the
instrument panel to remind you and
your passengers to fasten your belts.
If you turn the ignition switch ON
(II) without fastening your seat belt,
a beeper will sound and the indicator
light will blink. The beeper will stop
after a few seconds, but the light will
stay on until the driver’s seat belt is
fastened.
To fasten the belt, insert the latch
plate into the buckle, then tug on the
belt to make sure the buckle is
latched (see page
for how to
properly position the belt).
To unlock the belt, push the red
PRESS button on the buckle. Guide
the belt across your body so that it
retracts completely. After exiting the
vehicle, be sure the belt is out of the
way and will not get closed in the
door.
All seat belts have an emergency
locking retractor. In normal driving,
the retractor lets you move freely in
your seat while it keeps some
tension on the belt. During a collision
or sudden stop, the retractor
automatically locks the belt to help
restrain your body.
If the shoulder part of the belt is
pulled all the way out, the locking
mechanism will activate. The belt
will retract, but it will not allow the
passenger to move freely.
The lap/shoulder belt goes over
your shoulder, across your chest,
and across your hips.
The seat belts in all positions except
the driver’s have an additional
locking mechanism that must be
activated to secure a child seat (see
page
).
To deactivate the locking
mechanism, unlatch the buckle, and
let the seat belt fully retract. To
refasten the belt, pull it out only as
far as needed.
43
15
Additional Information About Your Seat Belts
Driver and Passenger Saf ety
Seat Belt System Components Lap/Shoulder Belt
20