manualshive.com logo in svg

Honda CR-V 2004, Owner'S Manual

The Honda CR-V 2004 Owner's Manual is a comprehensive guidebook for every CR-V owner. Packed with detailed instructions, maintenance tips, and troubleshooting advice, this manual is a must-have for maintaining your vehicle's performance. Download this essential resource for free at manualshive.com, and get the most out of your Honda CR-V 2004.

Share
Download
background image

If you see steam and/or spray
coming from under the hood, turn
off the engine. Wait until you see
no more signs of steam or spray,
then open the hood.

If you do not see steam or spray,
leave the engine running and
watch the temperature gauge. If
the high heat is due to overloading,
the engine should start to cool
down almost immediately. If it
does, wait until the temperature
gauge comes down to the midpoint,
then continue driving.

If the temperature gauge stays at
the red mark, turn off the engine.

The pointer of your vehicle’s
temperature gauge should stay in
the midrange. If it climbs to the red
mark, you should determine the
reason (hot day, driving up a steep
hill, etc.).

Safely pull to the side of the road.
Put the transmission in Neutral or
Park, and set the parking brake.
Turn off all accessories, and turn
on the hazard warning lights.

If your vehicle overheats, you should
take immediate action. The only
indication may be the temperature
gauge climbing to or above the red
mark. Or you may see steam or
spray coming from under the hood.

1.

2.

3.

4.

CONTINUED

If the Engine Overheats

Taking Care of the Unexpected

211

NOTICE:

Steam and spray from an
overheated engine can
seriously scald you.

Do not open the hood if steam
is coming out.

Driving with the temperature

gauge pointer at the red mark can
cause serious damage to your engine.

Summary of Contents for CR-V 2004

































































































































































































































































Reviews:

No comments

Related manuals for CR-V 2004

Hama Cup holder Operating Instruction preview
Cup holder
Brand: Hama Pages: 2
Abarth 124 SPIDER Service And Warranty Handbook preview
124 SPIDER
Brand: Abarth Pages: 36
Warrior Products 3860 Quick Start Manual preview
3860
Brand: Warrior Products Pages: 2
Mobis G4211ADE00AL Installation Instructions Manual preview
G4211ADE00AL
Brand: Mobis Pages: 16
Subaru starlink Manual preview
starlink
Brand: Subaru Pages: 216
FormFit HD 23A 07 Installation Instructions preview
HD 23A 07
Brand: FormFit Pages: 4
Edelbrock For 1985-1992 GM Cars and Trucks 17933 Installation Instructions preview
For 1985-1992 GM Cars and Trucks 17933
Brand: Edelbrock Pages: 4
TUFLOC Dodge Charger TufBox Installation Instructions Manual preview
Dodge Charger TufBox
Brand: TUFLOC Pages: 6
Harbor Freight Tools 66242 User Manual preview
66242
Brand: Harbor Freight Tools Pages: 12
Honda 0SR95-HL4-211A Installation Instructions preview
0SR95-HL4-211A
Brand: Honda Pages: 3
S3 Power Sports S3193 Installation Instructions preview
S3193
Brand: S3 Power Sports Pages: 2
Subaru 2004 Impreza OUTBACK SPORT Owner'S Manual preview
2004 Impreza OUTBACK SPORT
Brand: Subaru Pages: 34
Aston Martin V8 Vantage Workshop Manual preview
V8 Vantage
Brand: Aston Martin Pages: 415
Poison Spyder TrailGate TJ Installation Instructions preview
TrailGate TJ
Brand: Poison Spyder Pages: 5
Mercedes-Benz 2013 S-CLASS Owner'S Manual preview
2013 S-CLASS
Brand: Mercedes-Benz Pages: 493
PMT AS7.M100.001 User Manual preview
AS7.M100.001
Brand: PMT Pages: 16
Charge Amps Halo Pole Mount Manual preview
Halo Pole Mount
Brand: Charge Amps Pages: 14
Navman N-series B2+ User Manual preview
N-series B2+
Brand: Navman Pages: 27

Brands by name

Popular brands

Load more brands