Honda CL500A 2023 Manual Download

Page: 85 / 122

Drive Chain

Inspecting the Drive Chain

Slack

Check the drive chain slack at several points

along the chain. If the slack is not constant at

all points, some links may be kinked and

binding.

Have the chain inspected by your dealer.

Shift the transmission to Neutral. Stop the

engine.

Place your vehicle on its side stand on a

firm, level surface.

Move the lower part of the drive chain up

and down to check chain slack, midway

between the sprockets.

Drive chain slack:

30 - 40 mm (1.2 - 1.6 in)

Do not ride your vehicle if the slack

exceeds 50 mm (2.0 in).

Roll the vehicle forward and check that

the chain moves smoothly.

Inspect the sprockets.

P. 62

Clean and lubricate the drive chain.

P. 63

20221007115421_32MLPB000_eng_BOOK Page 85 Friday, October 07 2022 11:57:00 JST

Maintenance

Drive chain

Summary of Contents for CL500A 2023



























































































































Search results

Summary of Contents for CL500A 2023

Reviews:

Related manuals for CL500A 2023

Brands by name

Popular brands

Honda CL500A 2023, Manual

Search results

Summary of Contents for CL500A 2023

Reviews:

Related manuals for CL500A 2023

Brands by name

Popular brands