Refueling from a Portable Fuel Container
If you need to refuel your vehicle from a portable fuel container, use the
funnel provided with your vehicle.
1. Turn off the engine.
2. Press the fuel fill door release button. The fuel fill door opens.
3. Remove the funnel
4. Place the end of the funnel on the lower part of the filler opening, then
insert it slowly and fully. Make sure that the end of the funnel goes down
along with the filler pipe.
5. Fill the tank with fuel from the
portable fuel container. Pour fuel
carefully so you do not spill any.
6. Remove the funnel from the filler
neck. Wipe up any fuel from the
funnel before storing it.
7. Shut the fuel fill door by hand.
Do not insert the nozzle of a portable fuel container or any funnel other than
the one provided with your vehicle. Doing so can damage the fuel system.
Do not try to pry open or push open the sealed fuel tank with foreign
objects. This can damage the fuel system and its seal.
DRIVING
108 |
HANDLING THE UNEXPECTED
Learn about what to do in critical or emergency situations.
Smart Entry System Battery Strength
If the battery life in your remote transmitter is weak, a message appears in the
driver information interface with information on how to start the engine.
1. Touch the back of the remote
transmitter to the ENGINE START/STOP
button while the indicator is flashing.
2. With the brake pedal or clutch pedal
pressed, press the ENGINE START/
STOP button within 10 seconds.
When you carry the remote transmitter (for
example, in a pocket or purse) and it is
outside the vehicle and within range (about 32 inches or 80 cm), you can lock or
unlock the doors and the trunk without handling the transmitter.
Shift Lever Does Not Move
For continuously variable transmission models: Follow the procedure below if
you cannot move the shift lever out of Park (P).
1. Set the parking brake.
2. Models with smart entry system: Remove the built-in key from the smart
entry remote.
Models without smart entry system: Remove the key from the ignition
switch.
3. Move the removable beverage holder tray rearward.
4. Wrap a cloth around the tip of a small
flat-tip screwdriver. Put it into the shift
lock release slot as shown in the image,
and remove the cover.
HANDLING THE UNEXPECTED
| 109