uu
Child Safety
u
Safety of Infants and Small Children
80
Safe Driving
3.
Slowly pull the shoulder part of the belt all
the way out until it stops. This activates the
lockable retractor.
4.
Let the seat belt retract several centimetres
and check that the retractor has switched
modes by pulling on the webbing. It should
not pull out again until it is reset by
removing the latch plate from the buckle.
u
If you are able to pull the shoulder belt
out, the lockable retractor is not
activated. Slowly pull the seat belt all the
way out, and repeat steps 3 – 4.
5.
Grab the shoulder part of the seat belt near
the buckle, and pull up to remove any slack
from the lap part of the belt.
u
When doing this, place your weight on
the child restraint system and push it into
the vehicle seat.
1
Installing a Child Restraint System with a Lap/Shoulder Seat Belt
After the child restraint system is installed properly,
check if the lockable retractor is activated and the
belt is fully retracted and locked. To deactivate a
lockable retractor, release the buckle and allow the
seat belt to wind up all the way.
Models with lockable retractor
Models with lockable retractor
21 CITY 4D PET (ID KN)-42T00R031.book 80 ページ ２０２１年１月７日 木曜日 午後４時１３分
