uu
When Driving
u
Shifting
226
Driving
■
Shift Lever Operation
1
NOTICE
When you change the shift lever from
(
D
to
(
R
and
vice versa, come to a complete stop and keep the
brake pedal depressed.
Operating the shift lever before the vehicle has come
to a complete standstill can damage the transmission.
Use the shift position indicator to check the lever
position before pulling away.
If the shift position indicator blinks when driving, in
any shift position, there is a problem with the
transmission.
Avoid sudden acceleration and have the transmission
checked by a dealer as soon as possible.
The fuel supply may be cut off if you drive at engine
speeds in or over the tachometer’s red zone (engine
speed limit). If this happens, you may experience a
slight jolt.
It may not be possible to operate the shift lever if the
brake pedal is applied while the shift lever release
button is held down.
Depress the brake pedal first.
When shifting positions in extremely low
temperatures (-30°C), there may be a short delay
before the shift position is displayed. Always confirm
you are in the correct shift position before driving.
Tachometer’s
red zone
Shift Position Indicator/
Transmission System
Indicator
M
(7-Speed Manual Shift
Mode) Indicator/Shift
Indicator
Models with paddle shifters
Depress the brake pedal and press the
shift lever release button to shift.
Shift without pressing the shift lever
release button.
Press the shift lever release button and shift.
Models with driver information interface
Models with information display
Shift Position Indicator/
Transmission System
Indicator
M
(7-Speed Manual Shift
Mode) Indicator/Shift
Indicator
Models with paddle shifters
Tachometer’s
red zone
21 CITY 4D PET (ID KN)-42T00R031.book 226 ページ 2021年1月7日 木曜日 午後4時13分