Activating the Electrical System in an Emergency
The mechanical key and ID tag can be used
to activate the electrical system when the
electric system cannot be turned on because
the Honda SMART Key battery becomes
weak or dead.
#
Set up to ID number input mode
1.
Remove the front seat using a 5 mm Hex
wrench provided in the tool kit.
u
To access the tool kit, remove the rear
seat.
2.
3.
Pull out the SMART ECU fuse with the
fuse puller and wait about 2 minutes
before insert the SMART ECU fuse again.
4.
Push and hold the ignition ON switch for
more than 4 seconds.
u
The steering lock indicator comes on
and the system enters the ID number
input mode.
5.
Check the ID number on the ID tag.
20200219171806_31MKR6000_enu_BOOK Page 197 Wednesday, February 19 2020 17:28:26 JST
Troubleshooting
194
SMART ECU fuse
ID number
