Tyre Puncture
u
Removing Wheels
94
Tr
ou
bles
hoo
ting
2.
Make sure that the slot on the brake
caliper bracket is positioned in the lug on
the swingarm.
3.
Adjust the drive chain.
2
P. 70
4.
Tighten the rear axle nut.
5.
Tighten the drive chain adjusting nuts
lightly, then hold the adjusting nuts and
tighten the lock nuts.
6.
After installing the wheel, apply the brake
pedal several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Slot
Lug
Brake caliper bracket
Swingarm
Torque:
88 N·m (9.0 kgf·m, 65 lbf·ft).
Torque:
21 N·m (2.1 kgf·m, 15 lbf·ft).
http://www.motorcycle.in.th
