Honda Motorcycle & Scooter India Pvt. Ltd.
62
CB125 Shine SP
●
Adjust the brake (page 16-17) and drive
chain (page 54).
●
After installing the wheel, apply the brake
several times and then check if the wheel
rotates freely. Recheck the wheel if the
brake drags or if the wheel does not
rotate freely.
●
Always replace used cotter pins with new
ones.
If a torque wrench was not used for
installation, see your Honda dealer as
soon as possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
BRAKE PAD WEAR
(for Disc & CBS)
Refer to the Safety Precautions on page 39.
Brake pad wear depends upon the severity
of usage, the type of riding, and road
conditions. (Generally, the pads will wear
faster on wet and dirty roads.)
(1) Wear indicator grooves
¼f?klkoV ladsrd xzwOl½
Inspect the pads at each regular
maintenance interval (page 42).
Check the wear indicator grooves (1) in
each pad.
If either pad is worn to the bottom of the
grooves, replace both pads as a set. Visit
your Honda dealer for this service.
(1)
(1)
