If the ignition switch is turned to the (Off)
position or none of the
MODE
,
SEL
(up),
SEL
(down), buttons is pressed for about
30 seconds, the control is automatically
switched from the setting mode to the
ordinary display.
If the button is not pressed for about 30
seconds, items in the process of being set will
be discarded and only items where settings
have been finalised will be applied.
Only if the ignition switch is turned to the
(Off) position will items in the process of
being set and those that are finalised be
applied.
1 Time format setting:
You can switch the time format between 12
hour format or 24 hour format.
a
Turn the ignition switch to the (On)
position.
b
Press and hold the
MODE
button and the
SEL
(up) button or the
SEL
(down)
button, the current time format start
flashing.
c
Press the
SEL
(up) button or the
SEL
(down) button to select “12HOUR” or
“24HOUR”.
d
Press the
MODE
button. The time format is
set, and then the display moves to the clock
setting.
20171109154101_32MKK8000_eng_BOOK Page 48 Thursday, November 09 2017 15:56:56 JST
Operation Guide
43
Continued
