431
Han
d
lin
g the U
n
expected
Power System Won’t Start
Checking the Procedure
When the
READY
indicator does not come on and the
Ready To Drive
message
does not appear on the driver information interface, check the following items and
take appropriate action.
Checklist
Condition
What to Do
Check if the related
indicator or driver
information interface
messages come on.
The
Temperature Is Too Cold For Vehicle To Operate
message appears.
2
Driver Information Interface Warning and
Information Messages
The
To Start, Hold Remote Near Start Button
message
appears.
u
Make sure the keyless access remote is in its operating range.
2
ENGINE START/STOP Button Operating Range
P. 127
2
If the Keyless Access Remote Battery is
Weak
The
POWER SYSTEM
indicator comes on.
Have your vehicle checked by an authorized
Acura NSX dealer.
The transmission system indicator blinks and
Transmission
Problem Apply Parking Brake When Parked
message
appears.
The power system can be activated as a
temporary measure.
2
If the Transmission System Indicator Blinks
along with the Warning Message
Check the brightness
of the interior lights.
The interior lights are dim or do not come on at all.
Have the 12-volt battery checked by an
authorized Acura NSX dealer.
The interior lights come on normally.
Check all fuses, or have your vehicle checked by
an authorized Acura NSX dealer.
2
P. 447
Check the gear
position.
The transmission is not in
(
P
.
Change the gear position to
(
P
.
Check the
immobilizer system
indicator.
When the immobilizer system indicator is blinking, the power
system cannot be turned on.
2
1
If you must start the vehicle immediately, use an
assisting vehicle to jump start it.
2
P. 434
17 NSX-31T6N6000.book 431 ページ 2016年4月22日 金曜日 午後3時44分