74
In
strum
e
nt Pa
nel
Indicators
Indicator
Name
On/Blinking
Explanation
Message
Parking Brake
and Brake
System Indicator
(Red)
●
Comes on for a few seconds when
you set the power mode to ON,
then goes off if the parking brake
has been released.
●
Comes on when the parking brake
is applied, and goes off when it is
released.
●
Comes on when the brake fluid
level is low.
●
Comes on if there is a problem
with the brake system.
●
The beeper sounds and the
indicator comes on if you drive
with the parking brake not fully
released.
●
Comes on while driving
- Make sure
the parking brake is released. Check the
brake fluid level.
2
What to do when the indicator
comes on while driving
P. 536
●
Comes on along with the brake
system indicator (amber)
- Immediately
stop in a safe place. Contact a dealer for
repair. The brake pedal becomes harder
to operate. Depress the pedal further
than you normally do.
●
Comes on along with the ABS
indicator
- Have your vehicle checked by
a dealer.
2
If the Brake System Indicator (Red)
Comes On
P. 536
Brake System
Indicator
(Amber)
●
Comes on for a few seconds when
you set the power mode to ON,
then goes off.
●
Comes on if there is a problem
with the cooperative control with
regenerative braking, the electric
servo brake system, or the hill start
assist system.
●
Stays on constantly
- Avoid high speeds
and sudden braking. Take the vehicle to a
dealer immediately.
U.S.
Canada
(Red)
U.S.
Canada
(Amber)
15 ACCORD FHEV-31T3W6100.book 74 ページ 2014年7月23日 水曜日 午後3時10分