background image

Auto Door

Locks/HomeLink

®

HomeLink

®

(EX-L V6)

Press and hold the button on the 
remote and the HomeLink button at 
the same time. Then, while 
continuing to hold the HomeLink 
button, press and release the button 
on the remote every 2 seconds.

Does the LED blink at a faster rate within 20 
seconds?

Press and hold 
the HomeLink 
button again.

Training 

complete

YES

NO

HomeLink indicator   
flashes for 2 seconds, 
then remains on.

HomeLink LED 
remains on.

YES

NO

YES

NO

Position the remote transmitter you 
wish to link 1–3 inches from the 
HomeLink button you want to program.

1

Press and hold the desired 
HomeLink button and the button on 
the remote transmitter.

Does the HomeLink indicator (LED) blink at a 
faster rate after about 10 seconds?

2

a

The remote has a rolling code. 
Press the “learn” button on the 
remote-controlled device (e.g., 
garage door opener).

Press the programmed HomeLink 
button again; the remote-controlled 
device should operate.

Within 30 seconds, press and 
hold
 the programmed HomeLink 
button for 2 seconds.

a

Press and hold the programmed 

HomeLink button for about a 

second.

Does the device (garage door opener) work?

3

b

4

5

Training a Button

Indicator remains 
on for about 25 
seconds (standard 
transmitter).

Indicator flashes rapidly 
for 2 seconds, then 
remains on for about 23 
seconds (rolling code 
transmitter).

Press and hold the desired 
HomeLink button until the HomeLink 
indicator begins to flash slowly.

When the indicator begins to flash 
slowly, continue to hold the 
HomeLink button and follow steps 
1– 4 under Training a Button.

1

2

Retraining a Button

Erasing Codes

To erase codes stored in all buttons, 
press and hold the two outer buttons 
until the HomeLink indicator begins to 
flash (about 10 to 20 seconds), then 
release the buttons.

If you have any problems programming 
HomeLink, see the owner's manual included with 
the device you are trying to program, call 
HomeLink at (800) 355-3515 or visit 
www.homelink.com.

If you sell the vehicle, make sure to 
erase all codes.

The HomeLink Universal Transceiver built into your vehicle can be programmed to operate up to three
remote-controlled devices around your home, such as garage doors, lighting, or home security systems.

10 Accord TRG 2D_Base:Base  7/20/2009  1:32 PM  Page 4

2010 Accord Coupe

Summary of Contents for Accord Coupe 2010

















Reviews: