Honda 2016 Accord Sedan, Manual

Page: 177 / 549

176
uu Operating the Switches Around the Steering Wheel u Brightness Control
Co
ntrols
Brightness Control
When the position lights are turned on and
the ignition switch is in ON
( w
*1 , you can use
the brightness control knob to adjust
instrument panel brightness.
Brighten: Turn the knob to the right.
Dim: Turn the knob to the left.
You will hear a beep when the brightness
reaches minimum or maximum. The
information display/multi-information display
will return to its original state several seconds
after you adjust the brightness.
■
Brightness level indicator
The brightness level is shown on the
information display/multi-information display
while you are adjusting it.
*1: Models with the keyless access system have an
ENGINE START/STOP button instead of an ignition
switch.
1 Brightness Control
Instrument panel brightness differs between when
the exterior lights are on and when they are off. The
instrument panel dims to reduce glare when the
lights are on.
Pressing the (Select/Reset) knob switches the
display between the brightness level and other
available information.
If you turn the knob to the right until the brightness
display is up to max, the beeper sounds. This cancels
the reduced instrument panel brightness when the
exterior lights are on.
The brightness can be set differently for when the
exterior lights are on, and when they are off.
Control Knob
Models with information display
Models with multi-information display
*
* Not available on all models
16 ACCORD 4D (KQ KS KZ KU MA KW KP ID NI)_31-42T2AT310.book 176 ページ ２０２１年５月２１日 金曜日 午後５時３６分