Honda 2011 Insight, Owner'S Manual

Page: 332 / 466

− − When the vehicle reaches the
maximum speed in any shift position,
you may feel the engine cut in and
out. This is caused by a limiter (112
mph, 180 km/h) in the engine’s
computer controls. The engine will
run normally when you reduce the
speed to below the maximum. To shift into the S
position, press the release button on
the front of the shift lever, and move
the lever to S. The S position is
similar to D, except the range of
ratios are different for better
acceleration and increased engine
braking.
With the shift lever in D or S, you
can also use the paddle shifters to
shift the transmission up or down.
With the paddle shifters, you can
operate the transmission much like a
manual transmission without a
clutch pedal. For more information
on driving with the paddle shifters,
see page
.
To shift to Low, press
the release button on the front of the
shift lever. Use Low to make better
use of engine power when climbing,
and for maximum engine braking
when going down steep hills.
For faster acceleration when in D, S,
or L, the transmission will
automatically ‘‘kick down’’ to a lower
range of ratios by pushing the
accelerator pedal to the floor.
328
EX models Insight and LX models
Automatic Transmission (CVT)
Second (S) Low (L)
Speed Limiter
326
10/09/02 14:23:08 31TM8610_331