background image

634

uu

Indicator, Coming On/Blinking

u

If the Malfunction Indicator Lamp Comes On or Blinks

Han

d

lin
g the U

n

expected

If the Malfunction Indicator Lamp Comes On or Blinks

Reasons for the indicator lamp to come on or blink

Comes on when there is a problem with the engine emissions control 
system.

Blinks when engine misfiring is detected.

Comes on when air may have entered the fuel system.

What to do when the indicator lamp comes on

Avoid high speeds and immediately get your vehicle inspected at a 
dealer.

What to do when the indicator lamp blinks

Park the vehicle in a safe place with no flammable items and wait at least 
ten minutes or more with the engine stopped until it cools.

If the Brake System Indicator (Red) Comes On

Reasons for the indicator to come on

The brake fluid is low.

There is a malfunction in the brake system.

What to do when the indicator comes on while driving

Press the brake pedal lightly to check pedal pressure.

If normal, check the brake fluid level the next time you stop.

If abnormal, take immediate action. If necessary, downshift the 
transmission to slow the vehicle using engine braking.

1

If the Malfunction Indicator Lamp Comes On or Blinks

NOTICE

If you drive with the malfunction indicator lamp on, 
the emissions control system and the engine could be 
damaged.

If the malfunction indicator lamp blinks again when 
restarting the engine, drive to the nearest dealer at 
50 km/h (30 mph) or less. Have your vehicle 
inspected.

Diesel models

1

If the Brake System Indicator (Red) Comes On

Have your vehicle repaired immediately.
It is dangerous to drive with low brake fluid. If there 
is no resistance from the brake pedal, stop 
immediately in a safe place. If necessary downshift 
the gears.

If the brake system indicator and 

ABS

 indicator come 

on simultaneously, the electronic brake distribution 
system is not working. This can result in vehicle 
instability under sudden braking.
Have your vehicle inspected by a dealer immediately.

18 CR-V (KE KG)-32T1G6400.book  634 ページ  2017年8月28日 月曜日 午後6時36分

Summary of Contents for 2011 CR-V


































































































































































































































































































































































































































































































































































































































































































Reviews: