Honda 2011 CR-V, Owner'S Manual

Page: 412 / 673

411
uu When Driving u Shifting
Continued
Driving
Shifting
Change the gear position in accordance with your driving needs.
Start the engine before you change the gear position.
■
Shift lever positions
9-speed automatic transmission models
1 Shifting
You cannot turn the ignition switch to LOCK
( 0
*1
and remove the key unless the transmission is in
( P
.
The vehicle may move forward very slightly even in
( N
while the engine is cold.
Depress the brake pedal firmly and, when necessary,
apply the parking brake.
When shifting positions in extremely low
temperatures (-30°C), there may be a short delay
before the shift position is displayed. Always confirm
you are in the correct shift position before driving.
The beeper sounds when you depress the accelerator
pedal with the gear position in
( N
.
Change the gear position to
( D
or
( R
with the brake
pedal depressed.
*1: Models with the keyless access system have an ENGINE
START/STOP button instead of an ignition switch.
3
WARNING
The vehicle can roll away if left unattended
without confirming that Park is engaged.
Always keep your foot on the brake pedal
until you have confirmed that
( P
is shown
on the gear position Indicator.
Park
Used when parking or starting the
engine
Reverse
Used when reversing
Neutral
Used when idling
Drive
Used:
● For normal driving (gears change
between 1st and 9th automatically)
● When temporarily driving in the
sequential mode
Drive (S)
Used for:
●
Automatically changing gears
between 1st and 8th (8th gear is used
only at high speed)
●
Driving in the sequential mode
18 CR-V (KE KG)-32T1G6400.book 411 ページ ２０１７年８月２８日 月曜日 午後６時３６分