Honda 2011 CR-V, Owner'S Manual

Page: 96 / 673

95
uu Indicators u
Continued
In
strum
e
nt Pa
nel
*1:Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.
Indicator Name On/Blinking Explanation Message
System Message
Indicator
●
Comes on for a few seconds when you
turn the ignition switch to ON
( w *1 ,
then goes off.
●
Comes on along with a beep when a
problem is detected. A system message
on the multi-information display
appears at the same time.
●
While the indicator is on, press the
(information) button to see the
message again.
●
Refer to the Indicators information in
this chapter when a system message
appears on the multi-information
display. Take the appropriate action for
the message.
●
The multi-information display does not
return to the normal screen unless the
warning is cancelled, or the
button is pressed.
—
Turn Signal and
Hazard Warning
Indicators
●
Blinks when you operate the turn signal
lever.
●
Blinks along with all turn signals if you
press the hazard warning button.
●
If you depress the brake pedal while the
high speed driving, both indicators and
all turn signals blink at the four times.
●
Does not blink or blinks rapidly - A
turn signal light bulb has blown.
Change the bulb immediately.
2 Replacing Light Bulbs
P. 566, 567, 569
—
High Beam
Indicator
●
Comes on when the high beam
headlights are on.
— —
18 CR-V (KE KG)-32T1G6400.book 95 ページ ２０１７年８月２８日 月曜日 午後６時３６分