Honda 2010 TRX500FA Page 274 Owner'S M Operation And Instruction Manualanual Download | Manualshive

Page: 274 / 306

background image

265

Noise Emission Control System

Fuel Permeation Emission Control System

Emission Control Systems

Technical Information

TAMPERING WITH THE NOISE CONTROL SYSTEM IS
PROHIBITED:
State laws prohibit, or Canadian provincial laws may prohibit, the
following acts or the causing thereof: ( ) The removal or rendering
inoperative by any person, other than for purposes of maintenance,
repair or replacement, of any device or element of design incorporated
into any new vehicle for the purpose of noise control prior to its sale or
delivery to the ultimate purchaser or while it is in use; or ( ) the use of
the vehicle after such device or element of design has been removed or
rendered inoperative by any person.

AMONG THOSE ACTS PRESUMED TO CONSTITUTE
TAMPERING ARE THE FOLLOWING ACTS:

Removal of, or puncturing the muffler, baffles, header pipes or any
other component which conducts exhaust gases.
Removal of, or puncturing of any part of the intake system.
Lack of proper maintenance.
Replacing any moving parts of the vehicle, or parts of the exhaust or
intake system, with parts other than those specified by the
manufacturer.

This vehicle complies with the Fuel Permeation Emission Control
regulations of the U.S. Environmental Protection Agency (EPA), the
California Air Resources Board (CARB), and Environment Canada
(EC).
The fuel tank, fuel hoses, and fuel vapor charge hoses used on this
vehicle incorporate fuel permeation control technologies.
Tampering with the fuel tank, fuel hoses, or fuel vapor charge hoses to
reduce or defeat the effectiveness of the fuel permeation technologies is
prohibited by federal regulations.

1.

2.
3.
4.

1

2

０９／０５／１８１０：３２：３４３１ＨＮ２６９００２７４

«
...
272
273
274
275
276
...
»

Summary of Contents for 2010 TRX500FA



















































































































































































































































































































Reviews:

No comments

Related manuals for 2010 TRX500FA

Brand: Cushman Pages: 158

Brand: Sakai Pages: 77

Brand: IBOTECH Pages: 60

Brand: Razor Pages: 12

WOLVERINE YXE70WPXH

Brand: Yamaha Pages: 186

Brand: Ski-Doo Pages: 28

Brand: Yamaha Pages: 94

Brand: Yamaha Pages: 166

BIGBEAR YFM400NM

Brand: Yamaha Pages: 162

Expediter EX-21 2017

Brand: Columbia Pages: 32

Brand: BERG Pages: 8

Evoquip Bison 120

Brand: Terex Pages: 224

ALTERRA 500 2018

Brand: Textron Pages: 72

07205TC Workman 3300-D

Brand: Toro Pages: 56

Brand: ShoreLand'r Pages: 17

Brand: Primo Water Pages: 12

Brand: Primo Water Pages: 12

M415XT MAINTAINER

Brand: Mauldin Pages: 78

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands