Turn on the lights to make sure
the new bulb is working.
Push the trunk lid trim back into
position.
Put the fastener into the hole on
the side of the trunk lining.
Reinstall the screw.
Open the trunk, and remove the
socket from the light assembly by
turning it one-quarter turn counter-
clockwise.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Reinstall the socket. Turn it
clockwise until it locks. Make sure
the new bulb is working.
The license plate has two lights
above it. The bulbs should be
replaced by your dealer.
2.
1.
3.
6.
7.
8.
Lights
Replacing a High-mount Brake
Light Bulb
Rear License Plate Light Bulbs
Ma
int
e
na
nce
331
BULB
SOCKET
０９／０５／１８ １９：０７：４２ ３１ＴＡ５６２０ ０３３６
2010 Accord Sedan
Summary of Contents for 2010 Accord Sedan
Page 121: ...118 11 04 13 56 44 31TA5620_123 2010 Accord Sedan I n f o r ma t i o nP r o v i d e db y...
Page 257: ...254 2010 Accord Sedan I n f o r ma t i o nP r o v i d e db y...
Page 277: ...274 2010 Accord Sedan I n f o r ma t i o nP r o v i d e db y...
Page 353: ...350 2010 Accord Sedan I n f o r ma t i o nP r o v i d e db y...
