The coolant level should be up to
the base of the filler neck. Add
coolant if it is low.
Pour the coolant slowly and
carefully so you do not spill any.
Clean up any spill immediately; it
could damage components in the
engine compartment.
Put the radiator cap back on, and
tighten it fully.
Pour coolant into the reserve tank.
Fill it to halfway between the MAX
and MIN marks. Put the cap back
on the reserve tank.
Do not add any rust inhibitors or
other additives to your vehicle’s
cooling system. They may not be
compatible with the coolant or
engine components.
If the reserve tank is completely
empty, you should also check the
coolant level in the radiator.
Remove the radiator cap by
pushing it down and turning it
counterclockwise.
Relieve any pressure in the cooling
system by turning the radiator cap
counterclockwise, without
pressing down.
Make sure the engine and radiator
are cool.
4.
1.
2.
3.
5.
6.
Engine Coolant
Ma
int
e
na
nce
317
RADIATOR CAP
RADIATOR CAP
V6 models
4-cylinder models
Removing the radiator cap
while the engine is hot can
cause the coolant to spray out,
seriously scalding you.
Always let the engine and
radiator cool down before
removing the radiator cap.
09/07/08 21:41:58 31TA5620_322
2010 Accord Sedan
Summary of Contents for 2010 Accord Sedan
Page 121: ...118 11 04 13 56 44 31TA5620_123 2010 Accord Sedan I n f o r ma t i o nP r o v i d e db y...
Page 257: ...254 2010 Accord Sedan I n f o r ma t i o nP r o v i d e db y...
Page 277: ...274 2010 Accord Sedan I n f o r ma t i o nP r o v i d e db y...
Page 353: ...350 2010 Accord Sedan I n f o r ma t i o nP r o v i d e db y...
