＋
As required by the FCC:
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s
authority to operate the equipment.
This device complies with Industry
Canada Standard RSS-210.
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must
accept any interference that may cause
undesired operation of the device.
Remove the old battery, and insert
a new battery into the back of the
cover with the
side facing down.
Install the parts in reverse order.
An improperly disposed of battery
can hurt the environment.
Always confirm local regulations
for battery disposal.
Inside the transmitter, separate
the inner cover from the keypad
by releasing the two tabs on the
cover.
Separate the transmitter by prying
its middle seam with your
fingernail.
5.
2.
3.
4.
Remote Transmitter
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
91
BATTERY
TAB
０８／０７／２２ １７：５５：３６ ３１ＳＷＡ６２０ ００９６
