Place the top of the wiper blade on
the end of the blade assembly, and
slide the blade onto the assembly
in the direction pointed to by the
arrow.
Make sure the blade is completely
installed.
Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
Slide the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
Lower the wiper arm down against
the windshield, the passenger’s
side first, then the driver’s side.
Make sure the three rubber tabs
inside the blade fit to each notch
of the reinforcement, as shown.
5.
6.
7.
4.
Wiper Blades
300
REINFORCEMENT
BLADE
TOP
０８／０７／２２ １８：２４：０２ ３１ＳＷＡ６２０ ０３０５
