Put your fingers under the front
edge of the hood. The hood latch
handle is above the ‘‘H’’ logo. Pull
this handle until it releases the
hood, then lift the hood.
Pull the support rod out of its clip,
and insert the end into either of
the designated holes pointed to by
an arrow.
To close the hood, lift it up slightly to
remove the support rod from the
hole. Put the support rod back into
its holding clip. Lower the hood to
about a foot (30 cm) above the
fender, then let it drop. Make sure it
is securely latched.
If the hood latch handle moves
stiffly, or you can open the hood
without lifting the handle, the
mechanism should be cleaned and
lubricated.
Park the vehicle, and set the
parking brake. Pull the hood
release handle under the lower left
corner of the dashboard. The
hood will pop up slightly.
1.
2.
3.
Service Station Procedures
Opening and Closing the Hood
B
e
fo
re
D
riv
ing
181
HOOD RELEASE HANDLE
LATCH
SUPPORT ROD
Summary of Contents for 2007 Ridgeline
Page 60: ......
Page 174: ...Compass 170 Zone Map Compass Display for Each Zone...
Page 196: ......
Page 236: ......