Honda 2007 CR125R, Owner'S Manual

Page: 61 / 144

Servicing Your Honda
57
Exhaust Valve Installation
1. Install the RC valves (1) into the slot on the
cylinder.
2. Position the RC valves fully open.
3. Install the valve shaft assembly (2) with its
position.
4. Install the collar (3).
(1) RC valves (3) collar
(2) valve shaft assembly
5. Make sure that the cut-outs of the valve shaft
(4) and collar (5) are aligned.
(4) cut-out of the valve shaft
(5) cut-out of the collar
6. Install the washer (6) and nut (7), then tighten
the nut to the specified torque:
6.6 lbf·ft (9 N·m, 0.9 kgf·m)
7. Install the stopper plate (8) and tighten the
socket bolt (9) to the specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
(6) washer (8) stopper plate
(7) nut (9) socket bolt
8. Install the cylinder (page 52).
RC Valve
(6)
(7)
(8)
(9)
(1)
(3)
(2)
(5) (4)
*CR125R/49~59(31KSR620).qxd 5/6/05 2:05 PM Page 57