Honda 2007 Accord Coupe Owner'S Manual Download Page 76

Page: 76 / 320

Make any steering wheel adjustment
before you start driving.

Push the lever under the steering
column all the way down.

Move the steering wheel up or
down and in or out to the desired
position. Make sure you can see
the instrument panel gauges and
the indicators.

Push the lever up to lock the
steering wheel in that position.

Make sure you have securely
locked the steering wheel in place
by trying to move it up, down, in,
and out.

Steering Wheel Adjustment

Inst

nt
s

Cont

Adjusting the steering wheel
position while driving may
cause you to lose control of the
vehicle and be seriously injured
in a crash.

Adjust the steering wheel only
when the vehicle is stopped.

Main Menu

Table of Contents

Main Menu

Table of Contents

Summary of Contents for 2007 Accord Coupe

































































































































































































































































































































Search results

Summary of Contents for 2007 Accord Coupe

Reviews:

Related manuals for 2007 Accord Coupe

Brands by name

Popular brands

Honda 2007 Accord Coupe, Owner'S Manual

Search results

Summary of Contents for 2007 Accord Coupe

Reviews:

Related manuals for 2007 Accord Coupe

Brands by name

Popular brands