The upper display shows the time
when the ignition switch is in the
ACCESSORY (I) or ON (II) position.
The navigation system receives
signals from the Global Positioning
System (GPS), and the displayed
time is updated automatically by the
GPS. Refer to the navigation system
owner’s manual to set up the time.
To set the time, press the clock set
(SOUND) button until you hear a
beep. The displayed time begins to
blink.
Press and hold the H (preset 4) side
of the bar until the hour advances to
the desired time. Press and hold the
M (preset 5) side of the bar until the
minutes advance to the desired time.
Press the clock set (SOUND) button
again to enter the set time.
You can quickly set the time to the
nearest hour. If the displayed time is
before the half hour, pressing the
clock set (SOUND) button until you
hear a beep, then pressing the R
(preset 6) side of the bar sets the
clock back to the previous hour. If
the displayed time is after the half
hour, the clock sets forward to the
beginning of the next hour.
For example:
1
:
06
will reset to
1
:00
1
:
53
will reset to
2
:00
If your vehicle’s battery is
disconnected or goes dead, you may
need to set the clock.
On models without navigation system
On models with navigation system
Setting the Clock
Fe
a
tu
re
s
173
CLOCK SET BUTTON
PRESET BARS
CLOCK
EX-L and EX-V6 models without navigation system is shown.
８ ３１ＳＤＮ６４０
７８
Main Menu
Table of Contents
s
t
Main Menu
s
t
Table of Contents
Summary of Contents for 2007 Accord Coupe
Page 185: ......
