−
−
−
−
You can use the instrument panel
brightness control knob to adjust the
illumination of the audio system (see
page
). The audio system
illuminates when the parking lights
are on, even if the radio is off.
Press the knob to get it
to pop out. Turn it to adjust the
Treble level. Pull it out slightly
farther to adjust the Balance, or side-
to-side strength. Push the knob back
in when you are done adjusting the
sound.
Press the SOUND knob repeatedly
to display the Bass (BAS), Treble
(TRE), Balance (BAL), and Fader
(FAD) settings.
Each mode is shown in the display as
it changes. Turn the SOUND knob
to adjust the setting to your liking.
When the level reaches the center,
you will see a ‘‘C’’ in the display. The
system will return to the audio
display about 5 seconds after you
stop adjusting a mode.
Adjust the Balance, or side-
to-side strength of the sound.
Adjust the Fader, or the
front-to-back strength of the sound.
Adjust the Treble in the
sound.
Adjust the Bass in the sound.
Press the knob to get it
to pop out. Turn it to adjust the Bass
level. Pull it out slightly farther to
adjust the Fade, or front-to-back
strength. Push the knob back in
when you are done adjusting the
sound.
67
On EX and SE models in the U.S., and
EX and EX-L models in Canada
On LX model
Playing the Radio
Audio System Lighting
TRE/BAL:
Adjusting the Sound
BAL
FAD
TRE
BAS
BAS/FAD:
Fe
a
tu
re
s
105
０４／０７／０２ １５：２７：１８ ３１Ｓ９Ａ６３０ ０１１０
