−
−
−
○
○
＋
−
The SCAN function
samples all stations with strong
signals on the selected band. To
activate it, press the SCAN button,
then release it. You will see SCAN in
the display. The system will scan for
a station with a strong signal. When
it finds one, it will stop and play that
station for about 5 seconds.
If you do nothing, the system will
scan for the next strong station and
play it for 5 seconds. When it plays a
station you want to listen to, press
the SCAN button again.
You can use these five methods to
find radio stations on a selected
band:
the
preset buttons, and
.
Use the TUNE knob to
tune the radio to a desired frequency.
Turn the knob right to tune to a
higher frequency, or left to tune to a
lower frequency.
The SEEK function
searches up and down from the
current frequency to find a station
with a strong signal. To activate it,
press the
or
SEEK button, then
release it.
The ignition switch must be in the
ACCESSORY (I) or ON (II) position.
Turn the system on by pushing the
PWR/VOL knob or the AM or FM
button (FM/AM button on EX,SE
and EX-L models). Adjust the
volume by turning the PWR/VOL
knob.
The band and frequency that the
radio was last tuned to is displayed.
To change bands, press the AM or
FM button (FM/AM button on EX,
SE and EX-L models). On the FM
band, ST will be displayed if the
station is broadcasting in stereo.
Stereo reproduction on AM is not
available.
XM Satellite Radio information is
available on page
.
108
CONTINUED
Optional for U.S. EX and SE models.
To Play the Radio
SCAN
TUNE, SEEK, SCAN,
AUTO SELECT
To Select a Station
TUNE
SEEK
Playing the Radio
Fe
a
tu
re
s
103
０４／０７／０２ １５：２６：５５ ３１Ｓ９Ａ６３０ ０１０８
