background image

©2005 American Honda Motor Co., Inc. - All Rights Reserved

1

1. Remove the carton cover and check

for damage.

The CB900F is crated at the factory in either a 
covered or uncovered crate. You may receive 
either one.

Covered crate:

Cut the strap and remove the carton cover. 
Remove the cardboard top.

Uncovered crate:

When stacking, protect the motorcycle from 
falling objects and bad weather.

Check the motorcycle for hidden damage.      
If you find damage, follow the instructions   
on the 

Delivery and Damage Claims 

Guidelines 

wall chart (Reorder No. S0477)    

before proceeding.

2. Remove the master cylinder and the 

clutch lever assembly.

Remove the bolt and the front brake       
master cylinder.

Do not allow the master cylinder to hang by 
its hose. The weight of the assembly could 
damage the hose.

Remove the bolt and the clutch                     
lever assembly.

3. Remove the front shipping brace.

Remove the nuts and the front              
shipping brace.

COVERED CRATE

STRAP

CARTON COVER

CARDBOARD TOP

UNCOVERED CRATE

BOLTS

MASTER CYLINDER

CLUTCH LEVER
ASSEMBLY

NUT

Summary of Contents for 2005 CB900F



















Reviews: