−
If you just
received your vehicle and have not
trained any of the buttons in
HomeLink before, you should erase
any previously learned codes before
training the first button. To do this,
press and hold the two outside
buttons on the HomeLink
Transceiver for about 20 seconds, or
until the red light flashes. Release
the buttons, then go to step 1.
If you are training the second or
third buttons, go directly to Step 1.
Hold the end of the garage door
2.
CONTINUED
Training HomeLink
Bef ore you begin
HomeLink Universal Transceiver
Fe
a
tu
re
s
155
０４／０５／２７ １８：０８：１１ ３１ＳＤＡ６２０ ０１５８
1. Unplug the garage door opener
motor from the electrical outlet.
opener remote 2 to 5 inches from
HomeLink. Make sure you are not
blocking your view of the red
indicator in HomeLink.
3. Press and hold the remote trans-
mitter button and one of the
HomeLink buttons at the same
time.
If the red indicator in HomeLink
begins to flash slowly at first,
buttons, and go to step 5.
then rapidly, release both
If the red indicator in HomeLink
continues to flash slowly (does
because your remote transmitter
not flash rapidly), it may be
stops transmitting after a short
time. Go to step 4.
Main Menu
Table of Contents
▲
▼
