Place the child seat on the vehicle
seat and attach the seat to the
lower anchors according to the
child seat maker’s instructions.
Other LATCH-compatible seats have
a flexible-type connection as shown
above.
Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Some LATCH-compatible seats
have a rigid-type connection as
shown above.
Lift the rear head restraint, then
route the tether strap over the
seat-back between the legs of the
head restraint, making sure the
strap is not twisted.
Attach the tether strap hook to the
tether anchor, then tighten the
strap as instructed by the child
seat maker.
Push and pull the child seat
forward and from side to side to
verify that it is secure.
6.
5.
3.
4.
7.
Installing a Child Seat
Driver and Passenger Saf ety
39
ANCHORAGE
POINT
TETHER STRAP
HOOK
Rigid type
Flexible type
０３／０６／０４ １４：１８：１６ ３１Ｓ５Ａ６３０ ００４２
Main Menu
▲
▼
Table of Contents
Summary of Contents for 2004 Civic
