−
−
It may be helpful to have someone
assist you with this procedure.
Find the ‘‘Training’’ button on your
garage door opener unit. The
location will vary, depending on
the manufacturer. The
manufacturer’s documentation
may help.
Press the Training button on the
garage door opener unit until the
light next to the button comes on,
then release it. The light may blink,
or come on and stay on. You then
have approximately 30 seconds to
complete the following steps.
Make sure you have properly
completed the ‘‘Training
HomeLink’’ procedure.
Press and hold the button on
HomeLink for 3
4 seconds.
(The same button you trained with
the ‘‘Training HomeLink’’
procedure.)
Press the HomeLink button again.
It should operate the garage door.
Press and hold the HomeLink
button again for 3
4 seconds.
This should turn off the training
light on the garage door opener
unit. (Some systems may require
you to press the button up to three
times.)
6.
2.
4.
5.
1.
3.
Comf ort and Convenience Features
HomeLink Wireless Control System
201
TRAINING BUTTON
