To load multiple CDs in one
operation:
To load a single CD:
Press and hold the LOAD button
until you hear a beep and see
‘‘LOAd’’ in the display, then
release the button.
Press and release the LOAD
button.
The system will load the CD, and
begin playing it.
On the upper left side of the
display, the disc number for an
empty position will begin blinking
and the green CD load indicator
will come on.
Insert the disc into the CD slot.
Insert it only about halfway; the
drive will pull it in the rest of the
way. You will see ‘‘BUSY’’ in the
display. The CD load indicator
turns red and blinks as the CD is
loaded.
The disc number for an empty
position starts to blink and the
green CD load indicator comes on.
When you see ‘‘LOAd’’ in the
display, insert the disc into the CD
slot. Insert it only about halfway;
the drive will pull it in the rest of
the way.
When the CD load indicator turns
green, press the LOAD button
again. When ‘‘LOAd’’ appears in
the display, insert the next disc
into the CD slot.
Repeat this until all six positions
are loaded. The system will then
begin playing the last CD loaded.
If you are not loading CDs into all six
positions, the system will begin
playing the last CD loaded.
If you stop loading CDs before all six
positions are filled, and you do not
press the LOAD button, the system
will wait for ten seconds, then stop
the load operation and begin playing
the last CD loaded.
1.
2.
3.
4.
5.
1.
2.
3.
Loading CDs in the Changer
Audio System
Comf ort and Convenience Features
158
