Honda 2002 RL, Owner'S Manual

Page: 236 / 343

Loosen the drain plug on the
bottom of the radiator. The
coolant will come out through the
hole in the splash cover. Turn the ignition ON (II). Turn
the heater temperature control
dial to maximum heat (climate
control to 90°F/32°C). Turn off
the ignition. Open the hood. Make
sure the engine and radiator are
cool to the touch.
Remove the radiator cap.
The cooling system should be
completely drained and refilled with
new coolant according to the time
and distance recommendations in
the maintenance schedule. Only use
Honda All Season Antifreeze/
Coolant Type 2. Use of any non-
Honda coolant or plain water can
result in corrosion and deposits in
the cooling system.
Draining the coolant requires access
to the underside of the car. Unless
you have the tools and knowledge,
you should have this maintenance
done by a skilled mechanic.
1.
2.
3.
CONTINUED
Replacing Engine Coolant
Cooling System
Maintenance
233
D D R R A A I I N N P P L L U U G G
01/09/28 20:03:32 31SZ3660_236