Honda 2001 Accord Sedan Owner'S Manual Download

Page: 38 / 372

Protecting Children

However, if the belt touches or

crosses the child's neck, the child

needs to use a booster seat.

Do not let a child wear a seat belt
across the neck.

This could result in

serious neck injuries during a crash.

Do not let a child put the shoulder

part of a seat belt behind the back or

under the arm.

This could cause

very serious injuries during a crash.

It also increases the chance that the
child will slide under the belt in a
crash and be injured.

Do not put any accessories on a seat

belt.

Devices intended to improve

occupant comfort or reposition the

shoulder part of a seat belt, severely

compromise the protective capability

of the seat belt and increase the

chance of serious injury in a crash.

Two children should never use the

same seat belt.

If they do, they could

be very seriously injured in a crash.

Using a Booster Seat

If a child needs a booster seat, we

recommend choosing a style that

allows the child to use the lap/

shoulder belt directly, without a

shield, as shown.

Whichever style you select, follow

the booster seat maker's instructions.

CONTINUED

Driver and Passenger Safety

Main Menu

Table of Contents

Summary of Contents for 2001 Accord Sedan





















































































































































































































































































































































































Search results

Summary of Contents for 2001 Accord Sedan

Reviews:

Related manuals for 2001 Accord Sedan

Brands by name

Popular brands

Honda 2001 Accord Sedan, Owner'S Manual

Search results

Summary of Contents for 2001 Accord Sedan

Reviews:

Related manuals for 2001 Accord Sedan

Brands by name

Popular brands