Honda 2000 RL, Owner'S Manual

Page: 104 / 330

Driving Position Memory System
Doing any of the following after
pressing the MEMO button will
cancel the storing procedure.
Not pressing a memory button
within 5 seconds.
Readjusting the seat or steering
position.
Readjusting the outside mirror
position.
Each memory button stores only one
driving position. Storing a new
position erases the previous setting
stored in that button's memory. If
you want to add a new position while
retaining the current one, use the
other memory button.
All stored driving positions will be
lost if your car's battery goes dead or
is disconnected.
Selecting a Memorized Position
You can select memorized positions
as follows.
1. Make sure the parking brake is set
and the shift lever is in Park.
2. Insert the key in the ignition
switch. If you do not insert the key
in the ignition switch, the steering
wheel will not adjust to the
memorized position until you do.
3. Press the desired memory button
(1 or 2) until you hear a beep, then
release the button.
The system will move the seat,
steering wheel and outside mirrors
to the memorized positions. The
indicator light in the selected
memory button will flash during
movement. When the adjustments
are complete, you will hear two
beeps and the indicator light will
remain on.
CONTINUED
Instruments and Controls
MEMORY BUTTONS