Protecting Children
To attach a tether to your car:
1. Using the illustration on page
38
,
locate the attachment point you
want to use.
2. Remove the plug with a small flat-
tipped screwdriver or a fingernail
file.
3. Install the anchor plate and
mounting hardware. The
hardware is available for purchase
from your Honda dealer (part
number 82410-SE3-C01). For
Canadian models, the hardware is
supplied with the vehicle.
When installing tether hardware,
make sure the toothed washer is on
the bottom of the bolt. Tighten the
bolt to:
16 lbf.ft(22 N·m, 2.2 kgf.m)
If a torque wrench was not used, see
your Honda dealer as soon as
possible to verify proper installation.
To attach the tether to the child seat,
follow the child seat maker's
instructions.
If you are not sure how to install the
tether, or you need mounting
hardware, contact your Honda dealer.
Driver and Passenger Safety
Main Menu
Table of Contents
▲
▼
