Changing a Flat Tire
15.Tighten the wheel nuts securely
in the same crisscross pattern.
Have the wheel nut torque check-
ed at the nearest automotive
service facility.
Tighten the wheel nuts to:
110 N.m (11 kg-m , 80 Ib-ft)
16.Remove the wheel cover or
center cap.
Place the flat tire face down in
the trunk well.
17.Remove the spacer cone from
the wing bolt, turn it over, and
put it back on the bolt.
18.Secure the flat tire by screwing
the wing bolt back into its hole.
19.Store the jack in its holder with
the end bracket facing to the
rear. Turn the jack's end bracket
to lock it in place. Replace the
cover. Store the tool kit.
20.Store the wheel cover or center
cap in the trunk. Make sure they
do not get scratched or damaged.
Taking Care of the Unexpected
WING BOLT
SPACER
CONE
Main Menu
Table of Contents
▲
▼
