Lights
Replacing Rear Bulbs
1. Open the trunk and lift up the
taillight assembly cover.
2. Remove the bulb holder assembly
by pinching the lock tabs and
pulling.
3. Determine which of the three
bulbs is burned out: tail/stoplight,
back-up light, and turn signal.
Remove that bulb by turning it
one-quarter counterclockwise and
pulling it out of the socket.
4. Install the new bulb in the socket.
5. Reinstall the bulb holder assembly
by lining up the bulbs with their
holes in the lens assembly, then
push the bulb holder assembly
until it locks in place.
6. Test the lights to make sure the
new bulb is working.
7. Reinstall the taillight assembly
cover.
Maintenance
COVER
LOCK TABS