Honda 1993 Accord Coupe Owner'S Manual Download Page 6

Page: 6 / 176

Seats

Front Seat

Adjust the seat position by pulling up on the adjustment lever under

the front edge of the seat cushion, and sliding the seat to the

desired position. Then release the lever and make sure the seat is

locked in position by moving it back and forth.

The angle of the seat-back can be changed by pulling up on the l e v e r

at the outside edge of the seat and leaning forward or back. Release

the lever and let the seat lock into place when it reaches the desired

angle.
Seat belts are most effective when the driver and passenger are
sitting up straight and well back in each seat.

Do not adjust the driver's seat while the car is moving; the seat
could move suddenly, causing loss of vehicle control.

To reduce the risk of sliding under the seat belts in a collision,

adjust the seat-backs to an upright position and sit well back in

the seat.

ADJUSTMENT LEVER

RELEASE LEVER

Pull up

Summary of Contents for 1993 Accord Coupe

















































































































































































Search results

Summary of Contents for 1993 Accord Coupe

Reviews:

Related manuals for 1993 Accord Coupe

Brands by name

Popular brands

Honda 1993 Accord Coupe, Owner'S Manual

Search results

Summary of Contents for 1993 Accord Coupe

Reviews:

Related manuals for 1993 Accord Coupe

Brands by name

Popular brands