Honda 1993 Accord Coupe Owner'S Manual Download Page 48

Page: 48 / 176

Mirrors

Rearview Mirrors

Keep the inside and outside mirrors clean and adjusted for best

visibility.

Be sure to adjust mirror angles before you start driving.

The inside mirror has day and night

positions. The night position re-

duces glare from the headlights of
vehicles behind you. Flip the small
tab on the bottom of the mirror

forward or backward to select day

or night position.

Manual Mirrors

(US: DX, Canada: LX)

The outside mirrors can be adjusted

by moving the knob located on each

door (driver's side only for US cars).

Power Mirrors (US: LX/EX/SE, Canada: EX-R/SE)

With the ignition switch in the " I I " position, move the main switch

to L (for driver's side) or R (for passenger's side), then use the

adjustment switch to adjust the outside mirrors to the correct angle.
After the mirrors have been adjusted, return the main switch to the

center (off) position.

NOTE:

Be sure to adjust mirror angles before you start driving.

MAIN SWITCH

ADJUSTMENT
S W I T C H

DAY/NIGHT

ADJUSTMENT
TAB

Summary of Contents for 1993 Accord Coupe

















































































































































































Search results

Summary of Contents for 1993 Accord Coupe

Reviews:

Related manuals for 1993 Accord Coupe

Brands by name

Popular brands

Honda 1993 Accord Coupe, Owner'S Manual

Search results

Summary of Contents for 1993 Accord Coupe

Reviews:

Related manuals for 1993 Accord Coupe

Brands by name

Popular brands