Metal Indicator (METAL/MTL) (US: LX/EX, Canada: EX-R)
Most metal or Cr02 cassettes are coded with slots on their back
edge. If such a cassette is inserted, the player will detect the slots
and automatically switch to the proper equalization for full
enjoyment of metal/CrO
2
tapes. The indicator light will go on when
coded cassettes are played.
Eject (EJECT)
Push this button to stop and eject the tape.
Ignition Key-OFF Eject: The cassette being played will be automat-
ically ejected when the ignition or the unit is turned off.
NOTE:
When one side of the tape ends, "Auto-Reverse" will automatically
begin playing the other side, therefore, you must push the eject
button to stop or remove the tape.
CLEAN Indicator Light
(US: LX, Canada: LX)
After 50 hours of cassette tape play, the light will come on as a
reminder to clean the tape heads. If the light comes on and the tape
heads were not cleaned at the recommended 30 hours of usage (see
maintenance section in the next page), they should be cleaned
immediately. To reset, push the indicator with a pointed instrument
such as a ball-point pen until the light goes off (about 3 seconds).
(US: EX, Canada: EX-R)
After 30 hours of cassette tape play, the CLEAN indicator light will
come on as a reminder to clean the tape heads. If the light comes on
and the tape heads were not cleaned at the recommended 30 hours
of usage (see maintenance section on the next page), they should be
cleaned immediately. To reset, push the indicator with a pointed
instrument such as a ball-point pen until the light goes off (about 3
seconds).
(cont'd)
Summary of Contents for 1992 Accord Coupe
Page 106: ......
Page 150: ...page 120...
