Changing a Flat Tire (cont'd)
9. Everytime you install the wheel on the brake hub, use a clean rag
to wipe any dirt off the mounting surface of the hub and the
wheel. This will assure a tight, even contact between the wheel
and hub.
10. Install the spare, and lug nuts hand tight.
11. Lower the car, remove the jack, then tighten the lug nuts
securely in an " X " pattern as shown.
12. Tighten the lug nuts to the recommended torque:
110 N.m(11 kg-m,80 Ib-ft)
If a torque wrench was not used, ask an authorized Honda dealer
to verify the torque as soon as possible.
TIGHTENING TORQUE
110 N.m (11 kg-m,80 Ib-ft)
Summary of Contents for 1992 Accord Coupe
Page 106: ......
Page 150: ...page 120...
