Ignition Switch
The combined ignition switch/anti-theft lock is located on the
right side of the steering column and has four positions:
0-LOCK position:
The key can be removed or inserted in
this position. To remove the key, push it in at position I, then
turn it to 0 and pull it out. When the key is removed, the
steering column will lock.
NOTE: On cars equipped with automatic transmissions, the
transmission must be in Park before pushing and turning the
key to the 0-LOCK position.
Never turn the ignition switch to the lock position
or remove the key while the car is in motion; the steering
wheel can lock causing a loss of directional control, and an ac-
cident could result.
I-ACCESSORY position:
In this position, the accessory cir-
cuit is on, but the ignition circuit is off. If the key is difficult
to turn from the 0 to the I position, turn the steering wheel
slightly to relieve pressure on the lock.
II-ON position:
This is the normal running position.
III-START position:
The starter will engage when the key is
turned to this position.
To remind you to remove the ignition key when leaving your
car, a beeper will sound if the key is still in the ignition when
you open the driver's door. The beeper system is deactivated
when you turn the ignition to 0 (Lock) and fully remove the
key.
Summary of Contents for 1991 Accord Coupe
Page 85: ......
Page 129: ...page 99...
