2 of 2
AII 46215 (1112)
© 2011 American Honda Motor Co., Inc. – All Rights Reserved.
2.
Continue to slide the exhaust pipe finisher in until it
contacts the end of the exhaust pipe. While holding
the exhaust pipe finisher firmly against the exhaust
pipe, torque the washer bolt to 10 N·m (7 lbf·ft).
3.
Start the engine, and rev it up a few times. Listen for
vibration from the exhaust pipe finisher, and adjust if
necessary.
QA11103AD
EXHAUST PIPE
FINISHER
Push the exhaust pipe
finisher in until it stops.
EXHAUST PIPE
WASHER-BOLT
TORQUE:
10 N·m (7 lbf·ft)
CLEANING THE EXHAUST PIPE FINISHER
Use a sponge or cloth and a solution of mild liquid
dishwashing soap and water to clean the exhaust pipe
finisher. Wax the exhaust pipe finisher using Honda Metal
Polish (08C20-A021S). Never use a wax that contains
abrasive material as it may scratch the surface.
