6 of 28
AII 44367 (1008)
© 2010 American Honda Motor Co., Inc. – All Rights Reserved.
8.
Remove the roof console (four bolts and unplug the
vehicle connectors).
9.
Using a flat-tip screwdriver wrapped with a shop
towel, remove the right and left sun visor holders.
6313021Y
VEHICLE
CONNECTORS
2 SILVER
BOLTS
ROOF
CONSOLE
2 BLACK
BOLTS
812414AB
Push.
RIGHT
SUN VISOR
HOLDER
FLAT-TIP
SCREWDRIVER
Turn.
2 SUN VISOR
HOLDERS
LEFT
SUN VISOR
HOLDER
SHOP TOWEL
10. Pull back the weatherstrip as shown.
11.
Using a rubber mallet wrapped with a shop towel,
lightly tap the area marked “SIDE CURTAIN
AIRBAG” on the top of the left A-pillar trim to push in
the vehicle clip. Make sure to tap perpendicular to
the A-pillar trim.
932303BD
VEHICLE
CLIP
Pushed deep
behind the
vehicle panel.
RETAINING
TAB
Collapsed.
Lightly
tap.
VEHICLE CLIP
Remains in the
vehicle panel.
VEHICLE
BODY
VEHICLE
BODY
AREA MARKED
“SIDE CURTAIN AIRBAG”
Tap perpendicularly with
rubber mallet.
LEFT A-PILLAR
TRIM
VEHICLE
BODY
VEHICLE
CLIP
WEATHERSTRIP
Pull back.
SHOP
TOWEL
RUBBER
MALLET
RETAINING
TAB
VEHICLE
CLIP
Pull.
PIN
Comes off of
the clip.
TRIANGLE
MARK
