©
2007 American Honda Motor Co., Inc. - All Rights Reserved.
AII 38245 (0710)
3 of 8
5.
Remove the six clips that secure the left trunk
side trim panel, and remove the panel.
9.
Locate the three concealed welded nuts under the
insulator.
• Using scissors, cut the template in the position
as shown.
• Position the template on the insulator of the
fuel tank.
• Using a felt-tip pen, mark the inner edge of the
three squares.
Installing the XM Radio Bracket
6.
Inside the trunk, pull out the vehicle subharness
beside the fuel tank by cutting the vehicle clip with
wire tie. Take care not to damage the vehicle
harness when cutting the wire tie.
3612011M
FELT-TIP PEN
TEMPLATE
SQUARES (3)
3626010M
TEMPLATE
Cut.
3626050M
LEFT TRUNK
SIDE TRIM PANEL
CLIP
CLIP
CLIP
Push in
Pull out
CLIP
(Long)
3611011M
TAPE
FUEL TANK
VEHICLE
SUBHARNESS
FUEL TANK
VEHICLE CLIP
WITH WIRE TIE
DUMMY
CONNECTOR
Pull up, turn
counterclockwise,
and remove.
7.
Remove the vehicle clip with wire tie from the fuel
tank.
8.
Remove the tape from the vehicle subharness,
and free the harness. Remove the dummy
connector from the subharness connector.
